Hey guys, I built asterisk on some of my friends Synology units and thought others maybe interested in using asterisk on the DS211 In short, do the following: 1. Ssh into your NAS from a client as root user. (you need to enable SSH on the NAS for this to work) # Create a directory to store the IPKG. **Skip this step if you have IPKG already loaded on your NAS 2. Cd /volume1 3. Mkdir public 4.
Wget # Run the package to load IPKG 6. Sh syno-mvkw-bootstrap_1.2-7_arm-ds111.xsh *** Start of Asterisk Installation*** # Update IPKG & Check that Asterisk is available 7.
Installing Asterisk On Synology. It was time to upgrade this NAS to DSM 6. These are the packages that did not survive the upgrade. Just about every package needs an update after the DiskStation Manager 6 upgrade so allow plenty of time to get things running. Synology has an asterisk package, but this is a really outdated.
Ipkg update 8. Ipkg-opt list grep asterisk # I am installing asterisk 1.6 here as I could not get 1.8 working with GUI 2.0. Ipkg install asterisk16 10.
Ipkg install asterisk-gui *** Start Asterisk as a service on the NAS*** 10. Cd /opt/etc/asterisk 11. Asterisk –vvvvr # Lets get the HTTP server running. Use your preferred editor and change the two following files: manager.conf [general] enabled = yes webenabled = yes port = 5038 bindaddr = 0.0.0.0 [admin] secret = mysecret read = system,call,log,verbose,agent,user,config,dtmf,reporting,cdr,dialplan write = system,call,agent,user,config,command,reporting,originate http.conf; [general] enabled = yes bindaddr = 0.0.0.0 bindport = 8088 prefix = asterisk enablestatic = yes [post_mappings] backups = /opt/var/lib/asterisk/gui_backups moh = /opt/var/lib/asterisk/moh # Check that the HTTP Server is running. You need to be in asterisk CLI for this.
Step 11 gets you to the cli command line. Http show status example output of a working http server: NAS*CLI> http show status HTTP Server Status: Prefix: /asterisk Server Enabled and Bound to 0.0.0.0:8088 Enabled URI's: /asterisk/httpstatus => Asterisk HTTP General Status /asterisk/phoneprov/. => Asterisk HTTP Phone Provisioning Tool /asterisk/manager => HTML Manager Event Interface /asterisk/rawman => Raw HTTP Manager Event Interface /asterisk/static/. => Asterisk HTTP Static Delivery /asterisk/mxml => XML Manager Event Interface Enabled Redirects: None.
# now you can configure asterisk via the cli by browsing to: http::8088/asterisk/static/config/index.html Happy telephoning Michael. Hi Michael Have you been able to workout a startup script? If so could you please post it here? I got the server up and running to thank you for the tutorial;) I bought the B2K adapter at the spur of the moment for 4 Euros and I want to make free phone calls back home to Switzerland (voip-discount.com) I installed asterisk I have it running and the web interface works perfectly. I think asterisk integration can be achieved () If I now plug the B2K in the USB LED wont light up, think it is dueto the missing kernel module. There are 2 ways: As described here: people have crosscompled the module with bitbake. Unfortunately bitbake is not available via ipkg install So I took the sources for the kb2kskype from sourceforge and tried to compile them.
You can find the log in the attachment. It did not got very far. I would be very grateful for any kind of suggestions to solve the problem Thank you very much. To make the (asterisk) deamon start at boot create a script in /usr/syno/etc/rc.d/ S99Asterisk.sh command: touch /usr/syno/etc/rc.d/S99Asterisk.sh Edit the script with vi command: vi /usr/syno/etc/rc.d/S99Asterisk.sh Copy and paste the following script: -------------------------------------------------------- #!/bin/sh # Copyright (c) 2000-2003 Synology Inc. All rights reserved.
Krinitskiy P. Kontrol' i reviziya v usloviyakh avtomatizatsii bukhgalterskogo ucheta [Control and audit in automated accounting]. Moscow, Finansy i statistika — Finance and Statistics, 2012 (in Russian). Pupko g m audit i reviziya uchebnik in the philippines. London: Butterworth and Co (publishers) Ltd. Manual of auditing (The Coopers and Lybrand). Bookcraft (Bath) Ltd.
SynoStop=/usr/bin/killall User=root if [ 'start' = '$1' ]; then su -l $User -c '/opt/sbin/asterisk' > /dev/null 2>&1 & elif [ 'stop' = '$1' ]; then $SynoStop asterisk elif [ 'restart' = '$1' ]; then $0 stop $0 start fi -------------------------------------------------------- Write and close the file with vi command: (in command mode):wq! Make the script executable command: chmod +x /usr/syno/etc/rc.d/S99Asterisk.sh Thanks to jos.vh for his wonderful post. I followed the rules in the first post, but I installed Asterisk 1.8.6.0. I do get the GUI on http::8088/asterisk/static/config/index.html. But when I login I get a message about automatic upgrading with an OK button. When I click this button I get the same message again, and again, and again, and again.
- Author: admin
- Category: Category
Hey guys, I built asterisk on some of my friends Synology units and thought others maybe interested in using asterisk on the DS211 In short, do the following: 1. Ssh into your NAS from a client as root user. (you need to enable SSH on the NAS for this to work) # Create a directory to store the IPKG. **Skip this step if you have IPKG already loaded on your NAS 2. Cd /volume1 3. Mkdir public 4.
Wget # Run the package to load IPKG 6. Sh syno-mvkw-bootstrap_1.2-7_arm-ds111.xsh *** Start of Asterisk Installation*** # Update IPKG & Check that Asterisk is available 7.
Installing Asterisk On Synology. It was time to upgrade this NAS to DSM 6. These are the packages that did not survive the upgrade. Just about every package needs an update after the DiskStation Manager 6 upgrade so allow plenty of time to get things running. Synology has an asterisk package, but this is a really outdated.
Ipkg update 8. Ipkg-opt list grep asterisk # I am installing asterisk 1.6 here as I could not get 1.8 working with GUI 2.0. Ipkg install asterisk16 10.
Ipkg install asterisk-gui *** Start Asterisk as a service on the NAS*** 10. Cd /opt/etc/asterisk 11. Asterisk –vvvvr # Lets get the HTTP server running. Use your preferred editor and change the two following files: manager.conf [general] enabled = yes webenabled = yes port = 5038 bindaddr = 0.0.0.0 [admin] secret = mysecret read = system,call,log,verbose,agent,user,config,dtmf,reporting,cdr,dialplan write = system,call,agent,user,config,command,reporting,originate http.conf; [general] enabled = yes bindaddr = 0.0.0.0 bindport = 8088 prefix = asterisk enablestatic = yes [post_mappings] backups = /opt/var/lib/asterisk/gui_backups moh = /opt/var/lib/asterisk/moh # Check that the HTTP Server is running. You need to be in asterisk CLI for this.
Step 11 gets you to the cli command line. Http show status example output of a working http server: NAS*CLI> http show status HTTP Server Status: Prefix: /asterisk Server Enabled and Bound to 0.0.0.0:8088 Enabled URI's: /asterisk/httpstatus => Asterisk HTTP General Status /asterisk/phoneprov/. => Asterisk HTTP Phone Provisioning Tool /asterisk/manager => HTML Manager Event Interface /asterisk/rawman => Raw HTTP Manager Event Interface /asterisk/static/. => Asterisk HTTP Static Delivery /asterisk/mxml => XML Manager Event Interface Enabled Redirects: None.
# now you can configure asterisk via the cli by browsing to: http::8088/asterisk/static/config/index.html Happy telephoning Michael. Hi Michael Have you been able to workout a startup script? If so could you please post it here? I got the server up and running to thank you for the tutorial;) I bought the B2K adapter at the spur of the moment for 4 Euros and I want to make free phone calls back home to Switzerland (voip-discount.com) I installed asterisk I have it running and the web interface works perfectly. I think asterisk integration can be achieved () If I now plug the B2K in the USB LED wont light up, think it is dueto the missing kernel module. There are 2 ways: As described here: people have crosscompled the module with bitbake. Unfortunately bitbake is not available via ipkg install So I took the sources for the kb2kskype from sourceforge and tried to compile them.
You can find the log in the attachment. It did not got very far. I would be very grateful for any kind of suggestions to solve the problem Thank you very much. To make the (asterisk) deamon start at boot create a script in /usr/syno/etc/rc.d/ S99Asterisk.sh command: touch /usr/syno/etc/rc.d/S99Asterisk.sh Edit the script with vi command: vi /usr/syno/etc/rc.d/S99Asterisk.sh Copy and paste the following script: -------------------------------------------------------- #!/bin/sh # Copyright (c) 2000-2003 Synology Inc. All rights reserved.
Krinitskiy P. Kontrol' i reviziya v usloviyakh avtomatizatsii bukhgalterskogo ucheta [Control and audit in automated accounting]. Moscow, Finansy i statistika — Finance and Statistics, 2012 (in Russian). Pupko g m audit i reviziya uchebnik in the philippines. London: Butterworth and Co (publishers) Ltd. Manual of auditing (The Coopers and Lybrand). Bookcraft (Bath) Ltd.
SynoStop=/usr/bin/killall User=root if [ 'start' = '$1' ]; then su -l $User -c '/opt/sbin/asterisk' > /dev/null 2>&1 & elif [ 'stop' = '$1' ]; then $SynoStop asterisk elif [ 'restart' = '$1' ]; then $0 stop $0 start fi -------------------------------------------------------- Write and close the file with vi command: (in command mode):wq! Make the script executable command: chmod +x /usr/syno/etc/rc.d/S99Asterisk.sh Thanks to jos.vh for his wonderful post. I followed the rules in the first post, but I installed Asterisk 1.8.6.0. I do get the GUI on http::8088/asterisk/static/config/index.html. But when I login I get a message about automatic upgrading with an OK button. When I click this button I get the same message again, and again, and again, and again.